AVR Toolchain: Unterschied zwischen den Versionen

Aus Wiki CCC Göttingen
Wechseln zu: Navigation, Suche
(debian/ubuntu packages)
Zeile 1: Zeile 1:
==Debian Unstable===
+
==Debian/Ubuntu==
Needed programs for running the code under debian unstable:
+
* Needed programs for running the code under debian unstable:
apt-get install avr-libc gcc-avr avrdude
+
    apt-get install avr-libc gcc-avr
 +
* avrdude is available in the same name:
 +
  apt-get install avrdude
 +
* libusb is needed for running the hostcode for the flower:
 +
  apt-get install libusb-1.0-0-dev
 +
 
 +
(tested on debian unstable, should also run under ubuntu)
  
 
==Udev Rules==
 
==Udev Rules==

Version vom 29. Dezember 2010, 01:57 Uhr

Debian/Ubuntu

  • Needed programs for running the code under debian unstable:
   apt-get install avr-libc gcc-avr
  • avrdude is available in the same name:
  apt-get install avrdude
  • libusb is needed for running the hostcode for the flower:
  apt-get install libusb-1.0-0-dev

(tested on debian unstable, should also run under ubuntu)

Udev Rules

if you want to connect to the device as normal user, you have to create a little udev rule. For debian like systems create a file in the folder /etc/udev/rules.d and reload udev (/etc/init.d/udev relad):

$ cat /etc/udev/rules.d/z99_atmel.rules 
# Atmel AVR ISP mkII
SUBSYSTEM=="usb", SYSFS{idVendor}=="03eb", SYSFS{idProduct}=="2104", GROUP="plugdev", MODE="0660" 
# usbprog bootloader
ATTRS{idVendor}=="1781", ATTRS{idProduct}=="0c62", GROUP="plugdev", MODE="0660"
# USBasp programmer
ATTRS{idVendor}=="16c0", ATTRS{idProduct}=="05dc", GROUP="plugdev", MODE="0660"
# USBtiny programmer
ATTRS{idVendor}=="1781", ATTRS{idProduct}=="0c9f", GROUP="plugdev", MODE="0660"

(from http://www.mikrocontroller.net/articles/AVRDUDE#Aufruf_unter_Linux_als_user_.28non-root.29)