LED Cube/Building From Source: Unterschied zwischen den Versionen

Aus Wiki CCC Göttingen
Wechseln zu: Navigation, Suche
(Die Seite wurde neu angelegt: „==Getting the Sources== git clone http://www.0x53a.de/git/cube-3“)
 
Zeile 1: Zeile 1:
==Getting the Sources==
+
==Requirements
 +
===Getting the Sources===
 
  git clone http://www.0x53a.de/git/cube-3
 
  git clone http://www.0x53a.de/git/cube-3
 +
 +
===Toolchain===
 +
You will need gmake, avrdude and the avr toolchain (avr-gcc, avr-binutils, avr-libc).
 +
 +
==Building the Bootloader==
 +
The bootloader is in the directory <code>bootloader/firmware/</code>. It can be built by

Version vom 14. April 2012, 15:32 Uhr

==Requirements

Getting the Sources

git clone http://www.0x53a.de/git/cube-3

Toolchain

You will need gmake, avrdude and the avr toolchain (avr-gcc, avr-binutils, avr-libc).

Building the Bootloader

The bootloader is in the directory bootloader/firmware/. It can be built by