LED Cube/Building From Source: Unterschied zwischen den Versionen

Aus Wiki CCC Göttingen
Wechseln zu: Navigation, Suche
Zeile 1: Zeile 1:
==Requirements
+
==Getting the Sources==
===Getting the Sources===
+
 
  git clone http://www.0x53a.de/git/cube-3
 
  git clone http://www.0x53a.de/git/cube-3
  
===Toolchain===
 
You will need gmake, avrdude and the avr toolchain (avr-gcc, avr-binutils, avr-libc).
 
  
 
==Building the Bootloader==
 
==Building the Bootloader==
 +
===Requirements===
 
The bootloader is in the directory <code>bootloader/firmware/</code>. It can be built by
 
The bootloader is in the directory <code>bootloader/firmware/</code>. It can be built by

Version vom 14. April 2012, 15:33 Uhr

Getting the Sources

git clone http://www.0x53a.de/git/cube-3


Building the Bootloader

Requirements

The bootloader is in the directory bootloader/firmware/. It can be built by