LED Cube/Building From Source: Unterschied zwischen den Versionen

Aus Wiki CCC Göttingen
Wechseln zu: Navigation, Suche
Zeile 5: Zeile 5:
 
==Building the Bootloader==
 
==Building the Bootloader==
 
===Requirements===
 
===Requirements===
The bootloader is in the directory <code>bootloader/firmware/</code>. It can be built by
+
You will need
 +
* gmake
 +
* avr-libc, avr-binutils, avr-gcc
 +
* avrdude
 +
* an ISP- or JTAG-Programmer like AVR ISP mkII, usbasp, or any other.
 +
 
 +
The bootloader is in the directory <code>bootloader/firmware/</code>. It can be built with
 +
cd cube-3/bootloader/firmware/
 +
make
 +
 
 +
To flash it,

Version vom 14. April 2012, 14:34 Uhr

Getting the Sources

git clone http://www.0x53a.de/git/cube-3


Building the Bootloader

Requirements

You will need

  • gmake
  • avr-libc, avr-binutils, avr-gcc
  • avrdude
  • an ISP- or JTAG-Programmer like AVR ISP mkII, usbasp, or any other.

The bootloader is in the directory bootloader/firmware/. It can be built with

cd cube-3/bootloader/firmware/
make

To flash it,