LED Cube/Building From Source: Unterschied zwischen den Versionen

Aus Wiki CCC Göttingen
Wechseln zu: Navigation, Suche
(Requirements)
Zeile 9: Zeile 9:
 
* avr-libc, avr-binutils, avr-gcc
 
* avr-libc, avr-binutils, avr-gcc
 
* avrdude
 
* avrdude
* an ISP- or JTAG-Programmer like AVR ISP mkII, usbasp, or any other.
+
* an ISP- or JTAG-Programmer like AVR ISP mkII, usbasp, or any (avrdude-compatible, if you want to use the Makefile) other.
  
 
The bootloader is in the directory <code>bootloader/firmware/</code>. It can be built with
 
The bootloader is in the directory <code>bootloader/firmware/</code>. It can be built with
Zeile 15: Zeile 15:
 
  make
 
  make
  
To flash it,
+
To flash it, modify the <code>bootloader/firmware/Makefile</code>:
 +
AVRDUDE = avrdude -P usb -c avrispmkii -p m8 -p $(DEVICE)
 +
to match your programmer. This is the line for AVR ISP mkII. If you have a programmer, you probably know how to do this, so I won't get into it.

Version vom 14. April 2012, 14:36 Uhr

Getting the Sources

git clone http://www.0x53a.de/git/cube-3


Building the Bootloader

Requirements

You will need

  • gmake
  • avr-libc, avr-binutils, avr-gcc
  • avrdude
  • an ISP- or JTAG-Programmer like AVR ISP mkII, usbasp, or any (avrdude-compatible, if you want to use the Makefile) other.

The bootloader is in the directory bootloader/firmware/. It can be built with

cd cube-3/bootloader/firmware/
make

To flash it, modify the bootloader/firmware/Makefile:

AVRDUDE = avrdude -P usb -c avrispmkii -p m8 -p $(DEVICE)

to match your programmer. This is the line for AVR ISP mkII. If you have a programmer, you probably know how to do this, so I won't get into it.