LED Cube/Building From Source: Unterschied zwischen den Versionen

Aus Wiki CCC Göttingen
Wechseln zu: Navigation, Suche
Zeile 36: Zeile 36:
 
  cd cube-3/bootloader/commandline
 
  cd cube-3/bootloader/commandline
 
  make
 
  make
 +
 +
==Building the Standalone Firmware==
 +
The standalone firmware simply takes a sprite file and plays it repeatedly. It is included in <code>src-standalone</code>. The requirements are the same as for the Bootloader firmware.
 +
 +
===Building===
 +
cd cube-3/src-standalone
 +
make
 +
 +
===Flashing===
 +
There are now several ways fo flash this device. First is using an ISP programmer. In this case you have to adapt the file <code>src-standalone/programmer.mk</code>.

Version vom 14. April 2012, 16:00 Uhr

Getting the Sources

git clone http://www.0x53a.de/git/cube-3

Building the Bootloader

(Notice: You do not need this step if you have a preflashed cube, only if you want to modify the bootloader.)

Requirements

You will need

  • gmake
  • avr-libc, avr-binutils, avr-gcc
  • avrdude
  • an ISP- or JTAG-Programmer like AVR ISP mkII, usbasp, or any (avrdude-compatible, if you want to use the Makefile) other.

Building

The bootloader is in the directory bootloader/firmware/. It can be built with

cd cube-3/bootloader/firmware/
make

Flashing

To flash it, modify the bootloader/firmware/Makefile:

AVRDUDE = avrdude -P usb -c avrispmkii -p m8 -p $(DEVICE)

to match your programmer. This is the line for AVR ISP mkII. If you have a programmer, you probably know how to do this, so I won't get into it.

Then apply fuse settings and flash:

make fuse
make flash

Building the Bootloader Application

The Windows app is already prebuilt in the git repository. The bootloader is bootloadHID, so please inform yourself about how to do this for Windows.

For Linux, the command line application is included in bootloader/commandline/

Requirements

You will need libusb with headers.

Building

cd cube-3/bootloader/commandline
make

Building the Standalone Firmware

The standalone firmware simply takes a sprite file and plays it repeatedly. It is included in src-standalone. The requirements are the same as for the Bootloader firmware.

Building

cd cube-3/src-standalone
make

Flashing

There are now several ways fo flash this device. First is using an ISP programmer. In this case you have to adapt the file src-standalone/programmer.mk.